Item Tag : Hybrid

Solar Charge Controller Cable Wire Fits MC4 Connectors – 8 / 10 / 12 / 14 AWG

Product OverviewThe GS-MC4-CC conversion cables quickly and easily attach the leads on the back of your Solar panel to provide a bare end for connection to any Solar Charge Controller.Set of 6'' - 40 Foot cables with a MC4-comparable connector on one end and bare wire on the otherThermal/Water insulated 14/12/10/8 AWG PV wire, one red and one black (red color may be orange tint) Temperature rating: -40°C to 90°C / 75°C (Approved for up to 600V and is listed by Underwriters Laboratory (UL), as rated for 90° C (194° F) in dry and 75° C (167° F) in wet environments.) UL UV resistant rating of (35)Ideal for connecting Solar panels to any Solar charge controller Free First Class Shipping USA Only! (Red color may be Orange tint due to availability. Please specify in order if you need orange or red only.) Please allow 1-5cm error due to manual measurement and make sure you do not mind before ordering. The color of the actual items may slightly vary from the above images due to different computer screens and/or wire availability, red wire may have orange appearance, if you need only red or orange wire strictly please advise BEFORE or quickly after ordering. Thanks for your understanding. Free First Class Shipping USA Only!
Read More

Solar Panel Cable Wire Pair Black + Red Fits MC4 Connectors 8 / 10 / 12 / 14 AWG

Solar Panel Cable Wire Pair Black + Red Fits MC4 Connectors 8 / 10 / 12 / 14 AWG Safe - Protecting against short circuits and ground leakages. Suitable for use inside and connected to insulated equipment.High Performance - High current carrying capacity with low losses over length.High Quality - Resistance against UV, water, ozone, fluids, oil, salt and general weathering.Wide Use - Hard plastic connectors at each end. Suitable for using in solar panels, DC circuits, inverter wiring.Long Life - Engineered for long life and outdoor applications. Good abrasion resistance, excellent softness and stripping performance. Authentic - Unlike competitors we use completely 100% authentic copper of the highest quality.(Some vendors give you aluminum wire and call it copper.)Made In USA - Wires are manufactured and assembled in the USA. Connectors: 10 / 12 / 14 AWG Test voltage: 6 kV (50 Hz) Operating temperature: -40°C ~ 85°C Approvals: IP 67 protecting grade, safety class ii, flame class UL94-V0 Contact resistance: ≤5mΩ Insertion / withdrawal force: ≤50N / ≥50N Locking system: Snap inFits Standard MC4 Type Imported from China 8 AWG Connectors Rated Current :50A(10.0 mm² )Connector System: φ10mmWithstanding Voltage: TUV 6000V AC(1 Min)/UL 2200V DC(1 Min)Protection Class: Class IISuitable Cable Lines: 8 AWGProtection Degree: IP67, matedInsulation Material: PC + PAContact Material: Messing verzinnt Copper Alloy, tin platedFlame Class: UL94-V0Pollution Degree: 2Ambient Temperature Range: -40 ℃ to +90 ℃Upper Limiting Temperature: +110℃Contact Resistance of Plug Connectors:0.5mΩInsertion Force: less than 50NWithdrawal Force: over 50NLocking System:Snap-inFlame Class:UL-94-V0Salt Mist Spray Test Degree of Severity:IEC 60068-2-52 Wire: Diameter: 2.082mm²/3.307mm²/5.26mm²/8.37mm² (stated on the wire itself)Max. amps per conductor: 15A/20A/30A/50A (rated for continuous use) Max. voltage: 600 V Temperature rating: -40°C to 90°C / 75°C (Approved for up to 600V and is listed by Underwriters Laboratory (UL), as rated for 90° C (194° F) in dry and 75° C (167° F) in wet environments.)Copper conductors are annealed (soft) copper, compressed strand, insulated with a tough heat and moisture resistant polyvinyl chloride (PVC) Voltage for all applications is 600 volts Made In USA Specification: Color: Black & RedConnectors insulation material: PC/PA Connectors contact material: Copper, Silver-Plated Wire conductor material: Authentic Stranded Bare Copper Wire insulation material: PVC (polyvinyl chloride)UL Listed Heat ResistantMoisture ResistantUV Rating (35) Quantity: 1 Pair (Black + Red) (red color may be orange tint)Package Includes: 1 Pair Solar Panel Extension Cable (Red color may be Orange tint due to availability. Please specify in order if you need orange or red only.) Notes: If you also need Solar Charge Controller Cable Wire Fits MC4 Connectors then check out Kali-Deals other ebay listing: https://www.ebay.com/itm/293726562976 Please allow 1-5cm error due to manual measurement and make sure you do not mind before ordering. The color of the actual items may slightly vary from the above images due to different computer screens and/or wire availability, red wire may have orange appearance, if you need only red or orange wire strictly please advise BEFORE or quickly after ordering. Thanks for your understanding. Free First Class Shipping USA Only! Larger orders automatically upgraded to Priority Mail for Free!
Read More

VOLTSET 20W Solar Panel Kit 12V Solar Battery Trickle Charger Maintainer for RV

This solar panel kit is mainly used to maintain and trickle charge the 12V battery to extend the battery life throughout the year. The solar car charger is made of high-quality monocrystalline silicon material, which is impact-resistant, wind-snow-resistant, corrosion-resistant, and can adapt to any bad weather. The upgraded 10A MPPT charge controller is 25%-30% more efficient than conventional controllers. The controller adopts a fully glued design to avoid the possibility of water intrusion and moisture on rainy and snowy days as much as possible. The 360° adjustable and corrosion-resistant aluminum alloy frame makes the solar panel more durable than other solar panels. Equipped with four anti-fall angles, there is no need to worry about the solar panel breaking and scratching the arms. Note: Please look for the brand VOLTSET. We are official and genuine products, and our customers enjoy 12-month free warranty service and lifetime technical support. Thank you for supporting and choosing VOLTSET. ------------------------------------------------------------------------------------------------------------------------------------------------------------- 20W Solar Panel Kit For 12V Battery Maintenance & Trickle Charging Why We Need a Solar Trickle Charger or Battery Maintainer Batteries consume power slowly and car batteries will discharge automatically when the car is not used for a long time If the battery is completely depleted, even if it is fully charged again, the maximum capacity of the battery will be reduced The battery life will be reduced if the battery is not used and charged for a long time. 12V battery whose voltage is not kept above 12.4V has the possibility of sulfation, which is the main reason for the failure of many batteries. It is the knowledge of this knowledge is very few people, so the battery life will be shorter and shorter if not used for a long time. Upgraded 100% Waterproof 10A Charger Controller The upgraded 10A MPPT charge controller is 25%-30% more efficient than conventional controllers. The controller adopts a fully glued design to avoid the possibility of water intrusion and moisture in rainy and snowy days as much as possible. High Conversion Rate - the conversion rate of monocrystal can reach 30%, while polycrystalline is only 15%. Trickle & Maintain - makes up for the capacity loss caused by self-discharge after the battery is fully charged; beneficial to 12v battery maintenance and extending the life of the battery. This 20W solar battery charger provides full protection for all types of 12V batteries from overcharge, overvoltage, anti-reverse charge, over discharge, short circuit, etc. This solar trickle charger is made of high quality monocrystalline silicon solar chip cells, with a solar charging conversion efficiency of up to 30%. The battery panel surface is made of tempered solar glass which is different from others to achieve more than 2 times of solar light reabsorption, further improving the solar energy absorption efficiency. The solar car charger is made of high-quality monocrystalline silicon material, which is impact-resistant, wind-snow-resistant, corrosion-resistant, and can adapt to any bad weather. This solar trickle charger is equipped with a 360° adjustable mounting bracket, that can be used to position the panel at any angle, and easily mount the stand on the ground, wall, and roof,etc. The solar battery maintainer comes with protective on 4 corners to better protect the glass panel. During installation, the safety is protected from scratches. LED Indicators Monitoring With 3 clear LED indicators to help you visualize the working status and battery condition well at all times. Red light and Blue light (Charging) Blue light (In Sunlight) Green Light (Full Charge) No Light (Short Circuit) When solar power fails, you can check the connection in time. The solar charge maintainer is only powered by solar panels and does not consume battery power.
Read More